消防材料采购平台 消防员考试模拟系统
 

空气泡沫枪

点击图片查看原图
 
品牌: 澳龙
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 湖北 襄樊市
有效期至: 长期有效
最后更新: 2018-05-10 11:07
浏览次数: 439
询价
 
公司基本资料信息
详细说明
 一.简介

泡沫枪是消防人员的手提消防器材,可用管牙接口与消防水带接口相接,通过消防压力与泡沫液混合并吸入空气,产生空气泡沫。空气泡沫枪是主要由枪筒、手轮、枪体、球阀、吸液管和KY65管牙接口构成,用于扑救甲、乙、丙类液体火灾或喷射水用于扑救一般固体火灾。

二.工作原理

work principle

空气泡沫枪进水口端与消防水带连接,吸液管接口与吸液连接,吸液管另一端插入泡沫液桶内,当水流以0.7MPa压力通过水带进入枪内,经喷嘴喷出时,枪体内在水流的作用下形成负压,此时泡沫液通过吸液管吸入枪体内与水混合,当混合液由喷嘴射出时,由于射速再次形成负压,吸入大量空气与混合液混合,当经过枪筒使空气泡沫混合膨化,空气泡沫达到平衡后由枪筒喷出。

foam fire branch inlet end and the fire hose connection, to absorb fluid pipe interface and absorb fluid connection, to absorb fluid pipe the other end into the liquid foam inside bucket, with 0.7 MPa pressure when water flow through the water into the gun within the nozzle jet, the gun in the role of water in the body formed under negative pressure, the liquid foam at this time by smoking gun body in liquid pipe is mixed with water, and when the mixture by injection nozzle, because again firing rate forming negative pressure, and a lot of air inhaled with the mixture mixing, when after air bubble mixing barrel expanded, and the air bubble to balance out the barrel.

三.性能参数

performance parameters

 

 

产品型号

混合液额定流量(L/s)

额定工作压力(MPa)

发泡倍数(N)

20℃时

25%析液时间

20℃/min

射程(m)

流量充差

%)

混合比(%)

QP4/0.7Z

4

 

0.7

 

5≤N﹤20

 

2

18

 

±8

3~4或6~7

QP8/0.7Z

8

24

QP16/0.7Z

16

28

 

更多>本企业其它产品
移动式泡沫灭火装置(PY8-500L) 压力式泡沫比例混合装置(PHYM] 平衡式泡沫比例混合装置 移动式泡沫灭火装置 不锈钢泡沫产生器 立式泡沫产生器 不锈钢立式泡沫产生器 空气泡沫枪
 
网站首页 关于我们  |  官方微信  |  新手上路  |  联系方式  |  服务条款  |  会员短网址  |  法律声明  |  投稿说明  |  关于消防宝  |  粤ICP备16075420号  |  | 网站地图 | 排名推广 | 广告服务 | RSS订阅